System

Screen: Room Devices (step 5 of 7) — Air conditioning card, one AC row.

What it is

Four buttons — CoolMaster, Intesis, Crestron, IR — that say how the hub talks to this AC.

What to enter

1. Press the system the AC is wired to.
2. Fill the boxes that appear for it: Unit for CoolMaster or Intesis; the four joins for Crestron; the IR sender and codes for IR.

What it changes

In the house: The project saves this by itself. At the next Save & Deploy the hub drives the AC through the chosen system. A CoolMaster or Intesis AC with no unit is not sent to the hub.

In the app: The AC tile stays the same; its buttons work through the chosen system.

If it goes wrong

• If the AC does not respond, check the system is the one it is wired to, and that the gateway has an address on Project & Bridge.
• Changing system keeps the old unit and joins in the project, but only the chosen system's values are used.